A. The final design and materials proposed for a bespoke conservatory roof by Omega will take into account relevant extracts from the following British Standards and Building Regulations.

BS6399 : Parts 1 & 3 Loading for Buildings.
BSCP3 : Chapter V : Part 2 Wind Loading.
BS5516 Sloping & Vertical Glazing.
BS6262 Glazing for Buildings.
Approved Document N of the Building Regulations

B. Great care will be taken to ensure the final design of a conservatory roof is suitable for the purpose for which it is intended. The type and strength of the glazing bars, polycarbonate glazing and other roof elements will be selected to take into account imposed wind and dead loads.
A partial safety factor of 1:20 is included to ensure the integrity of the structure. Omega (Roofing) Plastics Ltd cannot be held responsible for any failure of their product resulting from site assembly of the roof however caused. 
This statement does not affect your statutory rights.

C. Please note it is the sole responsibility of the installer to ensure that the receiving support structures e.g. dwarf walls & base frames etc, are suitable for the purpose for which they are intended. Omega (Roofing) Plastics Ltd cannot be held responsible for the strength of these base structures or fixings, which are outside their control.

On-line quotation request.

Click 'Submit' to automatically forward your request.
Click 'Reset' should you wish to reselect your chosen options.