DIY Conservatory Roof Kit with Rafter-Supported Glazing Bars, 3.2m Width x 4.0m Projection














  • DIY Conservatory Roof Kit with Rafter-Supported Glazing Bars, 3.2m Width x 4.0m Projection
  • Buy DIY Conservatory Roof Kit with Rafter-Supported Glazing Bars, 3.2m Width x 4.0m Projection online today
  • DIY Conservatory Roof Kit with Rafter-Supported Glazing Bars, 3.2m Width x 4.0m Projection from Omega Build
  • Great deals on DIY Conservatory Roof Kit with Rafter-Supported Glazing Bars, 3.2m Width x 4.0m Projection
  • Affordable DIY Conservatory Roof Kit with Rafter-Supported Glazing Bars, 3.2m Width x 4.0m Projection
  • Great selection of DIY Conservatory Roof Kit with Rafter-Supported Glazing Bars, 3.2m Width x 4.0m Projection
£ 218.68 Ex. VAT
£ 262.42 Inc. VAT

Glazing Bar colour

Polycarbonate colour

Polycarbonate thickness

Quantity

Download PDF

No feedback has been left for this product yet…

Average User Rating :
No reviews

Rate this product



DIY Conservatory Roof Kit with Rafter-Supported Glazing Bars, 3.2m Width x 4.0m Projection from Omega Build



Product details:


The DIY Conservatory Roof Kit

This DIY Conservatory Roof Kit comes complete with all you will need for simple and easy installation of a lean-to conservatory roof. Glazing Bars and polycarbonate sheets are supplied at specific lengths to be cut to your required size on site.

For the experienced DIYer this kit offers a quick solution and a high quality, attractive product once completed. 

Please note that the projection quoted is the actual lengths of the glazing bars and panels. The actual horizontal projection achieved will vary depending on the pitch of the roof. 

This DIY Conservatory Roof Kit is only suitable for a timber supported structure. 

If you require a self-supported roof please see our self-supported roof kits. 

Each kit includes:

  • The required quantity of polycarbonate panels at the required length and 1.05m wide - Roof Projection and Panel length:
    1.5m.
    2.0m.
    2.5m.
    3.0m.
    3.5m.
    4.0m. 
  • Snap Fix Rafter Supported Glazing Bars in either white or brown   - Each bar pack includes PVC capping, an aluminium bar with gaskets and 1 clip-in top cap. 
  • PVC F-Section in either white or brown   - Ideal for use on the outside edges of the roof. If you remove the gasket on the outside edge of the Snapfix Glazing Bar the F Section will slot in making fitting easy.
  • PVC Sheet Closures in either white or brown   - These are used to protect and finish the bottom end of the polycarbonate sheet, and is fitted over the breather tape. It should be cut to fit between the glazing bar top caps.
  • Fixing Buttons in either white or brown   - Used to give additional strength to the structure, and are screwed through the sheet into a purlin.
  • Solid and breather tapes   - Solid top tape is applied to the top edge of the sheets, and the breather is applied to the gutter end to prevent dirt, insects and dust entering the sheets.