Omega Smart Canopy - 'Top Triangle' In-Fill Section for Sides of Canopy, 6mm Glass Clear Plate Polycarbonate In-Fill Panels, White Frame














  • Omega Smart Canopy - 'Top Triangle' In-Fill Section for Sides of Canopy, 6mm Glass Clear Plate Polycarbonate In-Fill Panels, White Frame
  • Buy Omega Smart Canopy - 'Top Triangle' In-Fill Section for Sides of Canopy, 6mm Glass Clear Plate Polycarbonate In-Fill Panels, White Frame online today
  • Omega Smart Canopy - 'Top Triangle' In-Fill Section for Sides of Canopy, 6mm Glass Clear Plate Polycarbonate In-Fill Panels, White Frame from Omega Build
  • Great deals on Omega Smart Canopy - 'Top Triangle' In-Fill Section for Sides of Canopy, 6mm Glass Clear Plate Polycarbonate In-Fill Panels, White Frame
  • Affordable Omega Smart Canopy - 'Top Triangle' In-Fill Section for Sides of Canopy, 6mm Glass Clear Plate Polycarbonate In-Fill Panels, White Frame
  • Great selection of Omega Smart Canopy - 'Top Triangle' In-Fill Section for Sides of Canopy, 6mm Glass Clear Plate Polycarbonate In-Fill Panels, White Frame
£ 83.86 Ex. VAT
£ 100.63 Inc. VAT

Canopy Projection

Canopy Side requiring In-Fill

Quantity

Omega Smart Canopy - 'Top Triangle' In-Fill Section for Sides of Canopy, 6mm Glass Clear Plate Polycarbonate In-Fill Panels, White Frame from Omega Build


Top Triangle In-Fill section in 6mm Glass Clear Polycarbonate

On completion of the Canopy installation we will ask for (3) pieces of information:

1.   The Canopy Roof pitch.
This will be required to an accuracy of +/- 0.1 degrees.
This is quite difficult to measure with normal household equipment so Omega will supply a digital protractor to enable the roof pitch to be measured.

2.   The distance from the wall that the canopy is mounted on to the inside face of the end supporting post.

3.   Whether the In-Fill section is on the Left-Hand or Right-Hand side of the canopy.

Our installation guide gives clear instructions that show what these angles/dimensions are and how to measure them.

With this information Omega will manufacture the In-Fill section components that will allow a straightforward installation that is made-to-measure.

The prices assume a standard installation where the base frame of the Top Triangle In-fill is located directly under and adjacent to the bottom edge of the Eaves/Gutter.

Prices are for (1) FULL SIDE In-Fill section (for (1) side of the canopy).

The In-Fill section frame is supplied in White, powder-coated aluminium.
The glazing panel is supplied in 6mm Glass Clear Plate Polycarbonate.

If you require the In-Fill section frames in a colour other than White please contact Omega for a quotation.

No feedback has been left for this product yet…

Average User Rating :
No reviews

Rate this product