Omega Smart Canopy - FULL Side In-Fill Section for Sides of Canopy, 6mm Glass Clear Plate Polycarbonate In-Fill Panels, White Frame

FULL SIDE In-Fill section in 6mm Glass Clear Plate Polycarbonate

On completion of the Canopy installation we will ask for (3) pieces of information:

1.   The Canopy Roof pitch.
This will be required to an accuracy of +/- 0.1 degrees.
This is quite difficult to measure with normal household equipment so Omega will supply a digital protractor to enable the roof pitch to be measured.

2.   The distance from the wall that the canopy is mounted on to the inside face of the end supporting post.

3.   Whether the In-Fill section is on the Left-Hand or Right-Hand side of the canopy.

Our installation guide gives clear instructions that show what these angles/dimensions are and how to measure them.

With this information Omega will manufacture the In-Fill section components that will allow a straightforward installation that is made-to-measure.

The prices assume a standard installation using a standard 2.5m supporting post length.

Prices are for (1) FULL SIDE In-Fill section (for (1) side of the canopy).

The In-Fill section frame is supplied in White, powder-coated aluminium.
The glazing panel is supplied in 6mm Glass Clear Plate Polycarbonate.

If you require the In-Fill section frames in a colour other than White please contact Omega for a quotation.